Spodumene Confirmed at Fonlo and Iganna
Released
Released
Announcement PDF
1
ASX Announcement 9 April 2026
Spodumene Confirmed at Fonlo and Iganna
HIGHLIGHTS
• The University of British Columbia (UBC) completed independent XRD/Rietveld work and
identified spodumene in all six previously disclosed verification samples, with quantified
phase abundances ranging from 28.4 wt% to 75.3 wt% of identified crystalline phases.
• The work identified pollucite in the highest-caesium Iganna samples, including 9.5 wt% in
sample 1069099 and 4.4 wt% in sample 1069100.
• These results support the Company’s interpretation of Fonlo and Iganna as lithium-
caesium-tantalum (LCT) pegmatite systems and provide an important technical input into
planned metallurgical work.
Chariot Resources Ltd (ASX: CC9) (“Chariot” or the “Company”) advises that independent
quantitative mineralogical testwork has identified spodumene in all six previously disclosed
verification samples from the Fonlo and Iganna projects in southwest Nigeria and has identified
pollucite in the highest-caesium Iganna samples. The Fonlo and Iganna projects form part of a
portfolio of four (4) lithium projects, in which Chariot is acquiring a 66.667% interest, pursuant to the
share sale agreement announced on 10 July 2025 and the variation deed announced on 3 December
2025 (together, the “Acquisition”).
The Electron Microbeam/X-Ray Diffraction Facility at The University of British Columbia (“UBC”)
completed the work using X-ray powder diffraction (“XRD”) data and Rietveld refinement on seven
selected powder samples. These results deliver the mineralogical follow-up that the Company
foreshadowed in its 4 December 2025 ASX announcement, which noted that formal mineral
identification remained pending.
This announcement summarises the six (6) samples for which the Company previously disclosed
geochemical assay results and project provenance to ASX. The phase abundances below show
identified crystalline phases normalised to 100%; they do not show bulk whole-rock composition,
saleable product grade or metallurgical recovery.
2
These results strengthen Chariot’s understanding of the LCT pegmatite system at Fonlo and Iganna.
They give the Company a clearer basis for follow-up metallurgical testwork and explain the elevated
caesium values that key Iganna samples previously returned by identifying pollucite.
Summary of Analyzed Verification Sample Results
UBC identified spodumene in all six publicly reported samples. The three Fonlo samples contained
34.1 wt% to 53.1 wt% spodumene, while quartz and plagioclase formed the principal gangue
minerals. At Iganna, sample 1069092 contained a mixed assemblage of spodumene, plagioclase,
quartz and mica, while samples 1069099 and 1069100 were spodumene-dominant and also
contained significant pollucite. UBC also flagged minor amblygonite-montebrasite in sample 1069100
as a low-confidence identification.
UBC did not identify lepidolite in the six analyzed verification samples. That result applies only to
those selected samples and does not exclude lepidolite elsewhere at Iganna, where Chariot has
previously reported visual observations of spodumene and lepidolite/lithium mica in pegmatites. In
the highest-caesium Iganna samples analysed by UBC, the elevated caesium signature is consistent
with pollucite, which UBC quantified at 9.5 wt% in sample 1069099 and 4.4 wt% in sample 1069100.
These results further support Chariot’s interpretation that Fonlo and Iganna host prospective lithium-
caesium-tantalum (LCT) pegmatite systems, while preserving the need for systematic metallurgical,
geological and drilling work to assess continuity of mineralisation, recoveries and scale.
Technical Note
The UBC program used XRD data and Rietveld refinement to identify and quantify crystalline phases
in powdered samples. The reported phase abundances show relative amounts of identified
crystalline phases normalised to 100%; they do not show bulk whole-rock chemistry, saleable product
specification or metallurgical recovery.
• This announcement does not report any new geochemical assay results.
• The laboratory flagged some minor accessory phases in the original laboratory table as low-
confidence identifications.
• Selected-sample mineralogy does not necessarily represent the full mineralogical variability
of either project area
Project Sample ID
Prior assay(a)
Li₂O / Ta₂O₅ /
Cs₂O (%)
Spodumene
(wt%) (b)
Pollucite
(wt%) (b)
Key observations
Fonlo 1069080
4.04 / 0.017 /
0.024
53.1 0.1
Quartz 28.1 wt% and
plagioclase 15.5 wt%
accompany a spodumene-
dominant assemblage.
3
Fonlo 1069081
2.66 / 0.006 /
0.068
34.1 0.3
Plagioclase dominates the
sample at 44.8 wt%, with
quartz at 18.1 wt%;
spodumene remains
material.
Fonlo 1069091
3.85 / 0.005 /
0.014
52.6 -
Quartz 20.1 wt% and
plagioclase 22.4 wt%
accompany a spodumene-
dominant assemblage.
Iganna 1069092
2.79 / 0.149 /
0.169
28.4 0.3
Plagioclase 31.1 wt%, quartz
25.1 wt% and mica 13.4 wt%
create a mixed assemblage.
Iganna 1069099
5.14 / 0.067 /
>2.5
67.8 9.5
Spodumene dominates the
sample; pollucite is material,
with mica at 5.6 wt% and
quartz at 6.3 wt%.
Iganna 1069100
5.96 / 0.107 /
1.66
75.3 4.4
Spodumene dominates the
sample and pollucite is
present; UBC also reported
minor amblygonite-
montebrasite as a low-
confidence identification.
Table 1: Summary of Mineralogical Test Results
a) Prior assay values are from the Company’s ASX announcement dated 4 December 2025. The Cs₂O value for sample 1069099
exceeded the upper detection limit in that assay campaign and was reported as >2.5% Cs₂O.
b) Mineralogy values are relative abundances of identified crystalline phases determined by XRD/Rietveld analysis and normalised
to 100%.
c) The original laboratory report covered seven samples. This table summarises the six samples previously disclosed to ASX from
Fonlo and Iganna
To the extent that this announcement contains references to prior exploration results, which have
been cross referenced to previous market announcements made by the Company, unless explicitly
stated, no new information is contained. The Company confirms that it is not aware of any new
information or data that materially affects the information included in the relevant market
announcements.
4
Context from Prior Announcements
• 14 October 2025: The Company reported extensive pegmatite outcrop at Fonlo and Iganna,
including artisanal workings that extend for approximately 6 km at Fonlo and shallow-dipping
pegmatite sills at Iganna.
• 24 November 2025: Chariot announced a three-phase small-scale mining (“SSM”) pathway that
included targeted exploration and localised resource definition, metallurgical testing and
evaluation of toll processing and logistics options.
• 4 December 2025: The Company reported six verification samples from Fonlo and Iganna that
assayed from 2.66% Li₂O to 5.96% Li₂O, with elevated tantalum and caesium values in certain
Iganna samples.
• 10 March 2026: The Company announced Nigerian Government approval for the transfer of six
lithium licences, materially de-risking completion of the Nigerian portfolio acquisition.
Next Steps
1. Chariot will incorporate the new mineralogical data into representative sample selection and
metallurgical testwork design.
2. Chariot will continue to integrate mineralogy, assay, mapping and field observations to refine
geological targeting at Fonlo and Iganna.
3. Chariot will advance previously announced exploration activities, including continued surface
work and drill planning, while it evaluates the phased SSM opportunity, subject to acquisition
completion, approvals and funding.
This announcement has been authorised for release by the Board of Directors of Chariot Resources
Ltd.
Shanthar Pathmanathan
Executive Chairman & Managing Director
Chariot Resources Ltd
Competent Person Statement
Information in this announcement that relates to exploration results is based on information
compiled by Dr E Max Baker who is a Geological Consultant to Chariot. Dr Baker is a Fellow of The
Australian Institute of Mining and Metallurgy and has sufficient experience relevant to the style of
mineralisation and type of deposit under consideration and to the activity that he is undertaking, to
qualify as Competent Person as defined in the 2012 Edition of the “Australasian Code for Reporting of
Exploration Results, Mineral Resources and Ore Reserves". Dr Baker consents to the inclusion in this
5
announcement of the information pertaining to exploration results in the form and context in which
it appears. Dr Baker holds 7,926,860 ordinary shares in Chariot (equal to a 3.97% interest in the
undiluted shares on issue of Chariot). Dr Baker is also engaged as a consultant by Chariot.
Important Notice
Statements in this announcement are made only as of the date of this announcement unless
otherwise stated and the information in this announcement remains subject to change without notice.
To the maximum extent permitted by law, neither Chariot nor any of its affiliates, related bodies
corporate, their respective officers, directors, employees, advisors and agents or any other person
accepts any liability as to or in relation to the accuracy or completeness of the information,
statements, opinions or matters (express or implied) arising out of, contained in or derived from this
announcement or any omission from this announcement or of any other written or oral information
or opinions provided now or in the future to any person.
This announcement may contain some references to forecasts, estimates, assumptions and other
forward-looking statements. Although the Company believes that its expectations, estimates and
projected outcomes are based on reasonable assumptions, it can give no assurance that they will be
achieved.
About Chariot
Chariot Resources Limited is a mineral exploration company focused on discovering and developing
high-grade and near surface lithium opportunities focused principally in the United States and Nigeria.
In addition to the recently announced acquisition of a Nigerian lithium portfolio which has yet to close,
Chariot has twelve (12) lithium projects, including two core projects in the United States (the “Core
Projects”) and a number of exploration pipeline projects which Chariot majority owns and operates.
The Core Projects include Chariot’s Black Mountain Project (which is prospective for hard rock lithium)
in Wyoming, USA and the Resurgent Project (which is prospective for claystone lithium) in Nevada and
Oregon, USA. Initial survey results from the Core Projects indicate high-grade lithium mineralisation
at surface.
The Nigerian portfolio of hard-rock lithium assets consists of four project clusters (Fonlo, Gbugbu,
Iganna, and Saki) in the Oyo and Kwara states which cover approximately 254 square kilometers and
are comprised of 8 exploration licences and 2 small-scale mining leases. These assets represent one
of the largest portfolios of lithium assets in the country and have a history of significant artisanal
lithium mining. Chariot anticipates completing the acquisition of the Nigerian portfolio in the first
quarter of this calendar year.
6
Chariot also holds an interest in two hard rock lithium exploration pipeline projects located in
Wyoming, USA, the Copper Mountain Project and the Tin Cup Project.
Chariot holds an interest in a hard rock lithium project in Zimbabwe. The Zimbabwe project licences
are in the process of being relinquished.
In addition, Chariot holds a portfolio interest in certain properties prospective for claystone hosted
lithium located in the State of Nevada in the United States through its interest in Mustang Lithium LLC.
7
JORC Code– Table 1 – Fonolo, and Iganna Projects, Nigeria
Section 1 Sampling Techniques and Data
(Criteria in this section apply to all succeeding sections.)
Criteria JORC Code explanation Commentary
Sampling
techniques
• Nature and quality of sampling (eg cut channels, random chips, or
specific specialised industry standard measurement tools appropriate
to the minerals under investigation, such as down hole gamma
sondes, or handheld XRF instruments, etc). These examples should
not be taken as limiting the broad meaning of sampling.
• Include reference to measures taken to ensure sample representivity
and the appropriate calibration of any measurement tools or systems
used.
• Aspects of the determination of mineralisation that are Material to the
Public Report.
• In cases where ‘industry standard’ work has been done this would be
relatively simple (eg ‘reverse circulation drilling was used to obtain 1
m samples from which 3 kg was pulverised to produce a 30 g charge
for fire assay’). In other cases more explanation may be required,
such as where there is coarse gold that has inherent sampling
problems. Unusual commodities or mineralisation types (eg
submarine nodules) may warrant disclosure of detailed information.
• A total of 23 samples were collected as part of the recent site visits by
Chariot. Six (6) of these samples, the Verification Samples, were
submitted for analysis with assay results now being reported, the
remaining 17 will be submitted for future metallurgical testing.
• These samples were collected under the supervision of the
Competent Person (CP) and submitted to the laboratory under the
supervision of the Continental’s geologist.
• The samples were grab samples collected from pit faces based on
visual observation and identification of lithium mineralisation, as well
as from piles of hand sorted lithium mineralised pegmatite material
and waste piles adjacent to the artisanal workings.
• The six Verification Samples for assay varied in weight from 2 kg to
3.5 kg.
• The six Verification Samples were submitted to the University of
British Columbia for quantitative phase analysis using the Rietveld
Method and X-ray powder diffraction data.
• The 17 samples for later metallurgical test work each weighed
between 4.5 kg and 15 kg.
• The CP considers the nature of these samples i.e. reconnaissance
grab samples, to be fit for purpose for early-stage exploration and
confirmation of previously reported mineralisation and grab sample
results previously reported from these deposits
Drilling
techniques
• Drill type (eg core, reverse circulation, open-hole hammer, rotary air
blast, auger, Bangka, sonic, etc) and details (eg core diameter, triple
or standard tube, depth of diamond tails, face-sampling bit or other
type, whether core is oriented and if so, by what method, etc).
• No drilling has been undertaken on the Projects or is reported in this
announcement.
Drill sample
recovery
• Method of recording and assessing core and chip sample recoveries
and results assessed.
• Measures taken to maximise sample recovery and ensure
representative nature of the samples.
• Whether a relationship exists between sample recovery and grade
• No drilling has been undertaken on the Projects or is reported in this
announcement.
8
Criteria JORC Code explanation Commentary
and whether sample bias may have occurred due to preferential
loss/gain of fine/coarse material.
Logging • Whether core and chip samples have been geologically and
geotechnically logged to a level of detail to support appropriate
Mineral Resource estimation, mining studies and metallurgical
studies.
• Whether logging is qualitative or quantitative in nature. Core (or
costean, channel, etc) photography.
• The total length and percentage of the relevant intersections logged.
• No drilling has been undertaken on the Projects or is reported in this
announcement.
• The nature of the material being sampled was described,
photographed and recorded. Other information recorded included
location, sample date, and short geological descriptions of the
location from which the sample was collected.
• All data was recorded in an Excel spreadsheet and merged with the
assay results data.
Sub-
sampling
techniques
and sample
preparation
• If core, whether cut or sawn and whether quarter, half or all core
taken.
• If non-core, whether riffled, tube sampled, rotary split, etc and
whether sampled wet or dry.
• For all sample types, the nature, quality and appropriateness of the
sample preparation technique.
• Quality control procedures adopted for all sub-sampling stages to
maximise representivity of samples.
• Measures taken to ensure that the sampling is representative of the in
situ material collected, including for instance results for field
duplicate/second-half sampling.
• Whether sample sizes are appropriate to the grain size of the material
being sampled.
• The 6 Verification Samples for immediate analysis were submitted to
MS Analytical West Africa Ltd’s laboratory (MSALABS) in Abuja,
Nigeria for sample preparation.
• Aliquots collected from the prepared samples were sent to MSALABS
in Vancouver, Canada for analysis.
• The remaining 17 samples reserved for metallurgical testing are
currently stored in a secure location at the Continental’s office in
Lagos, Nigeria.
Quality of
assay data
and
laboratory
tests
• The nature, quality and appropriateness of the assaying and
laboratory procedures used and whether the technique is considered
partial or total.
• For geophysical tools, spectrometers, handheld XRF instruments, etc,
the parameters used in determining the analysis including instrument
make and model, reading times, calibrations factors applied and their
derivation, etc.
• Nature of quality control procedures adopted (eg standards, blanks,
duplicates, external laboratory checks) and whether acceptable levels
of accuracy (ie lack of bias) and precision have been established.
• The six Verification Samples collected were sent to MSALABS in
Abuja, Nigeria for sample preparation and subsequently sent to
MSALABS in Vancouver, Canada for analysis.
• Sample preparation instructions were as follows: drying, crush to
2mm, split 500g aliquot and pulverize to 85% passing 75µm.
• The samples were analysed for 18 multi-elements including Li, Sn,
Mg, Al, Ti, K, Ni and REE elements using method PER-700R,
peroxide fusion with analysis by Inductively Coupled Plasma Atomic
Emission Spectrometry (ICP-AES) and Mass Spectrometry (ICP-MS)
• Peroxide fusion results in the complete digestion of the sample into a
molten flux. As fusion digestions are more aggressive than acid
digestion methods, they are suitable for many refractory, difficult-to-
dissolve minerals such as chromite, ilmenite, spinel, cassiterite and
minerals of the tantalum-tungsten solid solution series. They also
provide a more-complete digestion of some silicate mineral species
9
Criteria JORC Code explanation Commentary
and are considered to provide the most reliable determinations of
lithium mineralisation.
• Sodium peroxide fusion is a total digest and considered the preferred
method of assaying pegmatite samples.
• Commercial CRMs have been included in the sample batch
• The laboratory (MSALABS Vancouver) incorporated its own internal
QAQC procedures to monitor its assay results prior to release of
results to Continental and Chariot.
Verification
of sampling
and
assaying
• The verification of significant intersections by either independent or
alternative company personnel.
• The use of twinned holes.
• Documentation of primary data, data entry procedures, data
verification, data storage (physical and electronic) protocols.
• Discuss any adjustment to assay data.
• No verification sampling was done by the CP.
Location of
data points
• Accuracy and quality of surveys used to locate drill holes (collar and
down-hole surveys), trenches, mine workings and other locations
used in Mineral Resource estimation.
• Specification of the grid system used.
• Quality and adequacy of topographic control.
• Coordinates for the recently collected samples were located on a field
tablet running QGIS with a Bad Elf Flex Mini. In Universal Transverse
Mercator (WGS 84 Zone 31N).
• Topographic control using this system is generally +/-3 m.
Data spacing
and
distribution
• Data spacing for reporting of Exploration Results.
• Whether the data spacing and distribution is sufficient to establish the
degree of geological and grade continuity appropriate for the Mineral
Resource and Ore Reserve estimation procedure(s) and
classifications applied.
• Whether sample compositing has been applied.
• No drilling has been undertaken on the Projects or is reported in this
announcement.
• The rock chip samples were reconnaissance in nature and variably
spaced.
• Sampling was designed to confirm mineralisation and previously
reported results and is not sufficient to support a mineral resource
estimate.
• No sample compositing has been applied to the rock chip assay
results.
Orientation
of data in
relation to
geological
structure
• Whether the orientation of sampling achieves unbiased sampling of
possible structures and the extent to which this is known, considering
the deposit type.
• If the relationship between the drilling orientation and the orientation
of key mineralised structures is considered to have introduced a
sampling bias, this should be assessed and reported if material.
• This is not applicable at this level of investigation, as these are
reconnaissance rock chip samples collected from the pegmatite
outcrops to confirm mineralisation.
• No drilling has been undertaken on the Projects or is reported in this
announcement.
Sample
security
• The measures taken to ensure sample security. • The 23 rock chip samples collected at the Fonlo and Iganna Projects
were bagged by, and under the supervision of, both the CP and
Continental’s geologist and dispatched to MSALABs in Abuja by
10
Criteria JORC Code explanation Commentary
Continental.
Audits or
reviews
• The results of any audits or reviews of sampling techniques and data. • Data and sampling techniques have not been reviewed or audited by
a third party.
• The results of this sampling will be used to verify the results
previously reported by Continental and visual observations made
during the site visit. The CP does not consider this to be material for
early-stage exploration.
11
Section 2 Reporting of Exploration Results
(Criteria listed in the preceding section also apply to this section.)
Criteria JORC Code explanation Commentary
Mineral
tenement
and land
tenure status
• Type, reference name/number, location and ownership including
agreements or material issues with third parties such as joint
ventures, partnerships, overriding royalties, native title interests,
historical sites, wilderness or national park and environmental
settings.
• The security of the tenure held at the time of reporting along with any
known impediments to obtaining a licence to operate in the area.
• Chariot has entered into a Share Sale Agreement with Continental to
acquire a 66.667% interest in four lithium Projects (Fonlo, Gbugbu,
Iganna, Saki) in Nigeria. The Projects are located across Nigeria’s
Oyo and Kwara States and consist of eight exploration licences (EL)
and two small-scale mining licences (SSML) with a combined area of
approximately 254 km2. These licences will be transferred to a newly
established joint venture entity, C&C Minerals Limited, which will be
66.667% owned and controlled by Chariot with Continental holding
the remaining 33.333% interest.
• The tenure for each Project is as follows: Fonlo (EL-035506, EL-
040486), Gbugbu (EL-037243, EL-038574), Iganna (EL-035516),
Saki (EL-038148, SSML-036058, EL-036062, EL-036480, SSML-
036039).
• All licences are currently held by Continental, except for EL-040486
that is owned by Abualihim Nig Ltd.
• The CP is unable to verify if these licences are wholly owned by the
forementioned companies and has relied on data supplied by Chariot
and Continental.
• The CP is unable to verify if the tenure is subject to any
encumbrances or is potentially affected by material issues with third
parties.
• The CP has not independently verified the legal title of the tenements
and is not qualified to do so.
• The CP notes that based on a tenure listing provided by Continental
to Chariot, dated 10 October 2024, four licences have expired. A few
of the other licences are due for renewal in 2025 and it is understood
following discussions with Chariot that the renewals will be carried
out, as well as payment of any outstanding annual fees for all
licences.
• Chariot has informed the CP that they have engaged the services of a
Nigerian solicitor to verify the status of the tenure for all licences.
• The CP is aware of artisanal and small-scale mining activity on the
licences, but not the extent of this activity, nor any access challenges
this activity could present.
12
Criteria JORC Code explanation Commentary
Exploration
done by
other parties
• Acknowledgment and appraisal of exploration by other parties. • The Projects all contain variable amounts of significant artisanal
mining activities focussed on the lithium and semi-precious gemstone
mineralisation hosted by the pegmatites. The CP observed the
inactive or abandoned artisanal mining sites, typically represented by
large water-filled pits as well as ongoing artisanal mining sites.
• The only reported historical exploration undertaken on the Projects
was field reconnaissance mapping and rock chip sampling by
Continental’s geologists, rock chip sampling by geologists from an
independent third party, and sampling verification undertaken for the
Fonlo and Iganna Projects by an independent Competent Person for
Continental.
• The results of the historical sampling were released in a July 10th,
2025 announcement by Chariot.
Geology • Deposit type, geological setting and style of mineralisation. • The licences are located in the western Nigerian states of Kwara and
Oyo and occur within the western part of the Neoproterozoic aged
Pan-African Dahomeyide Orogenic Belt (DOB). This belt forms part of
a broader network that stretches across West Africa, along the
margin of the West African Craton, from Algeria southwards through
Nigeria, Benin and Ghana, and into the Borborema Province of Brazil,
known as the Pan-African–Brasiliano orogenic system. The basement
rocks in the western part the DOB, are dominated by Archaean
migmatitic gneisses, with Proterozoic schist belts of low-metamorphic
grade and highly deformed, metasedimentary and metavolcanic
rocks. In the east of the DOB, the metamorphic grades are higher,
ranging from upper amphibolite to granulite-facies, with migmatitic
metamorphic rocks derived from Palaeoproterozoic protoliths.
These rocks are intruded by extensive syn- to post- collisional
Neoproterozoic granitoid plutons referred to as the “Older Granites”.
The youngest of these, being the post-collisional granites are
associated with the rare metal pegmatites (which included the LCT-
pegmatites) of Nigeria. These pegmatites occur in a distinct belt that
extends SW–NE from Ife to Jos and appears to cut across the
boundary between the eastern and western terranes of the DOB.
Although the pegmatites are often found close to the margins of
peraluminous (S-type) granite plutons, age dating indicates they are
younger than the granites and emplaced later, and the origin
somewhat uncertain (Goodenough et. al., 2014).
13
Criteria JORC Code explanation Commentary
These pegmatites are described by Goodenough et al. (2025) (and
references therein) as being typically complex pegmatites (i.e.
internally zoned), often only a few metres thick, with a clear internal
zonation. This internal zonation comprises an unmineralised border
and wall zones that pass into an intermediate quartz, K-feldspar,
muscovite, albite zone with patches rich in beryl, lepidolite,
spodumene, cassiterite, columbo-tantalite mineral, and phosphates.
Reconnaissance mapping by Continental has visually identified
spodumene and lithium-mica mineralisation within all four (4) of the
project areas and limited reconnaissance rock chip sampling has
confirmed associated lithium mineralisation. (NOTE: The presence of
spodumene or any other lithium mineral does not necessarily equate
to lithium mineralisation unless confirmed by chemical analysis.) Due
to the irregular distribution of the spodumene and other lithium
minerals and the very coarse-grained nature of these pegmatites, it is
not possible to reliably estimate the spodumene, or other lithium
mineral, contents. The key exploration result is the identification of
spodumene and lithium-mica in the outcrops and no lithium grade is
implied.
No visual estimates are being made in this announcement.
Visual estimates of mineral abundance should never be considered a
proxy or substitute for laboratory analyses (XRD and chemical
testing) where concentrations or grades are the factor of principal
economic interest. Visual estimates also potentially provide no
information regarding impurities or deleterious physical properties
relevant to valuations). Further work is required by Chariot to
establish the nature, extent, lithium grade of any potential lithium
mineralisation and the impact of weathering at surface on the lithium
content of these minerals.
Reconnaissance mapping by Continental has identified lithium-
bearing pegmatites within the Fonlo Project, some of which have
been mined for their lithium and semi-precious gemstone
mineralisation. The host rocks within the Fonlo licences include biotite
gneisses, mica schists, and granites. The biotite gneiss dominates
the western to middle part of the area while the mica schist occurs in
14
Criteria JORC Code explanation Commentary
the eastern parts (Continental Lithium, 2024).
Reconnaissance mapping by Continental has identified lithium-
bearing pegmatites within the Gbugbu Project some of which have
been mined for their lithium and semi-precious gemstone
mineralisation. Host rocks comprise moderately foliated dark-grey
gneisses composed of feldspar, quartz, micas, amphibole and
pyroxene (Continental Lithium, 2024).
Reconnaissance mapping by Continental has identified lithium-
bearing pegmatites within the Saki Project with numerous artisanal
workings. Host rocks are similar to those described from the G
Share your feedback
Discover